| TABLE A: IFP-T6C Cartridge/Ring – Flow @ 1200 rpm | ||
| 03 | 10 | 22 |
| 05 | 12 | 25 |
| 06 | 14 | 28 |
| 08 | 17 | 31 |
| TABLE B: IFP-T6D CARTRIDGE/RING – FLOW @ 1200 RPM | ||
| 14 | 20 | 24 |
| 31 | 35 | 38 |
| 42 | 45 | 50 |
| TABLE B: IFP-T6E CARTRIDGE/RING – FLOW @ 1200 RPM | ||
| 45 | 50 | 52 |
| 62 | 66 | 72 |
| PUMP OPERATING SPECIFICATIONS Based on using petroleum oil at 120 F (49 C), viscosity 150 SUS at 100 F (32 cSt at 38 C), and 0 psi inlet pressure |
||||||||
| IFP Model series | Maximum pressure PSI (bar) |
Speed – rpm | Displ. in3/r (cm3/r) |
Mounting Standard | Weight lb (kg) |
Fluid Connection (SAE 4-bolt) |
||
| Max. | Min. | Pressure Ports | Suction Inlet | |||||
| T6C | 4000 (275 bar) | 2800 | 600 | .66 ~5.42 (10,8 ~88,7) | SAE – B | 34 (15,5) | 1 S.FLG (69) |
1 1/2 S.FLG |
| T6CC | 4000 (275 bar) | 2800 | 600 | .66 ~5.42 (10,8 ~88,7) | SAE – B | 57.3 (28) | 1″ S.FLG (69) |
3″ / 21/2 S.FLG |
| T6D | 3500 (24.5) | 2500 | 600 | 2.90 ~ 9.64(47.3 ~157.2 ) | SAE – C | 59.4( 27 ) | 11/4″S.FLG. | 2″ S.FLG |
| T6E | 3500 (24.5) | 2200 | 600 | 8.69 ~ 13.86 | SAE – C | 95 | 1 1/2″S.FLG. | 3 S.FLG |
| T6DC | 3500 (24.5) | 2500 | 600 | P1- 2.90 ~ 9.64 P2- .66 ~ 6.10 |
SAE – C | 80 | P1-1 1/4″ S.FLG P2-1 S.FLG |
3 S.FLG |
| T6EC | 3500 (24.5) | 2200 | 600 | P1- 8.69 ~ 13.86 P2- .66 ~ 6.10 |
SAE – C | 121 | P1-1 1/2″ S.FLG P2-1 S.FLG |
3 1/2 S.FLG |
| T6ED | 3500 (24.5) | 2200 | 600 | P1- 8.69 ~ 13.86 P2- 2.90 ~ 9.64 |
SAE – C | 145 | P1-1 1/2″ S.FLG P2-1 1/4″ S.FLG |
4 S.FLG |
– ALL SHAFTS AVAILABLE
– FLANGE KITS AVAILABLE
– VITON SEALS AVAILABLE
– FULL INTERCHANGEABLE PARTS PROGRAM