| IFP PVH ORDERING CODE * | |||||||||||||||
| SAMPLE CODE: | IFP | PVH | 98 | C | R | * | F | 1 | S | 10 | C | 25 | * | * | 31 |
| Legend | (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11) | (12) | (12) | (13) | (15) |
| (1) | IFP – INTERNATIONAL FLUID POWER PRODUCTION | ||||||||||||||
| (2) | PVH – HIGH PRESSURE / VARIABLE VOLUME AXIAL PISTON PUMP | ||||||||||||||
| (3) | FRAME SIZE – 57 / 74 / 98 / 131 | ||||||||||||||
| (4) | MOUNTING FLANGE : C – SAE “C” 4-BOLT TYPE | ||||||||||||||
| (5) | ROTATION: R – RIGHT HAND / L – LEFT HAND | ||||||||||||||
| (6) | THROUGH DRIVE OPTIONS: (BLANK) NO – THROUGH DRIVE (A) SAE-A 2 BOLT REAR FLANGE MOUNTING (B) SAE-B 2 & 4 BOLT REAR FLANGE MOUNTING (C) SAE-C 2 & 4 BOLT REAR FLANGE MOUNTING (S) ADJUSTABLE MAXIMUM STOP (NON-THROUGH DRIVE UNITS ONLY) |
||||||||||||||
| (7) | CONNECTION PORTS F – SAE 4-BOLT FLANGE PORTS / M -SAE 4-BOLT FLANGE PORTS -METRIC BOLT HOLES |
||||||||||||||
| (8) | DRIVE SHAFT: ( N) SHORT STRAIGHT KEYED ( 1 ) SAE-C STRAIGHT KEYED ( 2 ) SAE-C SPLINED 14 TOOTH ( 3 ) SAE-CC SPLINED 17 TOOTH (12 ) SAE-D SPLINED 17 TOOTH (13 ) SAE-CC STRAIGHT KEYED (16 ) SAE-D STRAIGHT KEYED” |
||||||||||||||
| (9) | SHAFT SEALS: ( S ) SINGLE / ( D ) DOUBLE | ||||||||||||||
| (10) | DESIGN NUMBER: 10 | ||||||||||||||
| (11) | PRESSURE ADJUSTMENT RANGE: ( C ) – 1015-3625 PSI (70-250 BAR) ( CM ) – 580-1885 PSI (40-130 BAR) |
||||||||||||||
| (12) | PRESSURE SETTINGS FACTORY: ( 25 ) – 3625 PSI (250 BAR) FOR “C” MODEL ( 7 ) – 1015 PSI (70 BAR) FOR “CM” MODEL |
||||||||||||||
| (13) | ADDITIONAL CONTROL FUNCTIONS: ( BLANK ) – NO ADDITIONAL CONTROLS ( V ) – LOAD SENSING ( T ) – TORQUE LIMITER ( VT ) – LOAD SENSING AND TORQUE LIMITER |
||||||||||||||
| (14) | TORQUE LIMITER FACTORY SETTINGS: ( BLANK ) – NO TORQUE LIMITER CONTROLS ( ** ) – CUSTOMERS TORQUE LIMITER SETTING IN 145 PSI (10 BAR) INCREMENTS |
||||||||||||||
| (15) | CONTROL DESIGN NUMBER: ( 31 ) – C, CM, C**V,OR IC CONTROLS ( 13 ) – C**T CONTROLS ( 14 ) – C**VT CONTROLS |
||||||||||||||
| PVH PISTON PUMPS OPERATION SPECIFICATION Based on using petroleum oil at 120 F (49 C), viscosity 150 SUS at 100 F (32 cSt at 38 C), and 0 psi inlet pressure |
||||||||
| IFP Model SERIES |
DISPLACEMENT cu.in/rev(cm3/rev) |
DELVERY GPM(LPM) |
MAX. SPEED RPM |
MAXIMUM PRESSURE PSI(BAR) OPERATING |
WEIGHT LBS (KG) |
FLUID CONNECTIONS (SAE 4 BOLTS) |
||
| 1800 RPM | MAX.SPEED | PRESSURE PORT |
SUCTION PORT |
|||||
| IFP PVH57 | 3.5(57.4) | 26 (98) | 35 (134) | 2400 | 3625 (250) | 79 (36) | 1″ | 2″ |
| IFP PVH74 | 4.5 (73.7) | 33 (125) | 41 (156) | 2200 | 3625 (250) | 99 (45) | 1″ | 2″ |
| IFP PVH98 | 6.0 (98.3) | 45 (170) | 53 (202) | 2100 | 3625 (250) | 108 (49) | 1″ | 2 1/2″ |
| IFP PVH131 | 8.0 (131.1) | 59 (223) | 66 (249) | 2000 | 3625 (250) | 145 (66) | 1 1/4″ | 2 1/2″ |