| Geroter/Geroler Motor Ordering code * | ||||||
| Sample order: | IFP | BMG | 30 | 2 | S | K |
| Legend | (1) | (2) | (3) | (4) | (5) | (6) |
| (1) | Fixed displacement Motors | |||||
| (2) | SERIES: BMG – GEROTER; BML – GEROLER | |||||
| (3) | DISPLACEMENT: See TABLE A BMG 9 DISPLACEMENTS; BML 8 DISPLACEMENTS |
|||||
| (4) | MOUNTING: 2 – SAE 2 BOLT; 4 – 4 BOLT (3.25″ BC) | |||||
| (5) | PORTING: S – 7/8″ = 14 SAE; P – 1/2″ NPT; B 1/2″ BSPP | |||||
| (6) | SHAFT: K – 1″ KEYED; S – 1″ 6B SPLINE | |||||
| * Mounting interchangeable with Char-Lynn / Danfoss / TRW / White | ||||||
| FEATURES … |
| · Smooth Operation at Low Speed
· Wide Range of Displacements · High Volumetric Efficiency · Compact I Economical · Reliable Output Speed · High Starting Torque |
| TABLE A: Displacement in3/r (cm3/r) | |
| BMG | BML |
| 3.0 (50) | 3.0 (50) |
| 4.9 (80) | 4.9 (80) |
| 6.1 (100) | 6.1 (100) |
| 7.6 (125) | 7.6 (125) |
| 9.8 (160) | 9.8 (160) |
| 12.2 (200) | 12.2 (200) |
| 15.2 (250) | 15.2 (250) |
| 19.2 (315) | 19.2 (315) |
| 24.4 (400) | |
| OPERATING SPECIFICATIONS Based on using anti-wear type oil at 150 SUS at 100 F, and 0 psi inlet pressure |
||||||
| IFP Model series | Displ. in3/r (cm3/r) |
Maximum pressure PSI (bar) |
Maximum Torque lb in (Nm) |
Maximum RPM | ||
| Continuous | Intermittent | Continuous | Intermittent | |||
| BMG | 3.0 – 24.4 (50 – 400) |
1800 (124) | 2400 (165) | 3350 (378) | 4000 (450) | 1000 |
| BML | 3.0 – 19.2 (50 – 215) |
2000 (138) | 1500 (172) | 1800 (320) | 4300 (485) | 1000 |